Completed Wire Solder

by Tim Rabideau on October 14, 2016 with No Comments

by Tim Rabideau on June 3, 2017 with No Comments

This article covers a new convertible top installation on a 1972 Oldsmobile Cutlass Supreme Convertible.... Read More

by Tim Rabideau on January 31, 2018 with No Comments

How to resurface cylinder heads – At Home! This article probably falls into the category... Read More

by Tim Rabideau on January 25, 2015 with 1 Comment

The Advice: K*********1 4 months ago (edited) +l******0 That’s right. Holding the clutch disengaged for... Read More

by Tim Rabideau on January 26, 2015 with No Comments

Here is a very good, very cheap mod that actually works. Install magnets at your... Read More

by Tim Rabideau on October 4, 2016 with 1 Comment

After restoring and painting the rear undercarriage and frame, it became apparent that the rear... Read More

by Tim Rabideau on March 12, 2017 with No Comments

Timelapse video of the Crusher Cutlass restoration. Video completed March 10th 2017. The frame... Read More